Ultrasonic Cleaner - Stainless Steel 99L Commercial Grade Digital
DOWNLOAD MANUAL
Ⅰ. Introduction
Digital control series ultrasonic cleaning machines have been widely used in hospitals, medicine, schools, scientific research, petroleum, chemical industry, light industry, metallurgy, machinery, transportation, national defense and other industries.
For instruments, meters, electronic devices, circuit boards, semiconductor silicon chips, magnetic materials, electroplating parts, hardware, optical lenses and spare parts, audio magnetic head, polyester filter element, spinneret, latex mold, medical equipment, glassware, jewelry The deep cleaning of clock parts, precision hardware, bearings, oil nozzles, oil pumps and parts and components with complex geometry in mechanical manufacturing, especially the dirt cleaning of deep holes, blind holes and concave and convex surfaces, is the most ideal high-efficiency and high-precision cleaning equipment at present.
When cleaning, choose to add the corresponding cleaning solution to achieve better cleaning effect.
Ⅱ. Ultrasonic Principle
Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Ultrasonic cleaning is extremely effective at removing dirt and grime which would normally require tedious manual cleaning by hand. It has been used to clean a wide variety of instruments and mechanical parts such as carburetors, returning them to almost “like new” condition without damage to delicate parts.
Ⅲ. Cleaner Components
① SUS 304 stainless steel tank ② Sound proof lid ③ Mesh basket ④ Operation panel ⑤ Fan ⑥ Drain valve
Ⅳ. Technical Parameter
- Inner tank size: 550*450*400mm
- Overall dimemtion: 820*630*850 mm
- Capility: 99L
- Working HZ: 28/44 Khz
- Ultro-sonic: 1500 Watt
- Heater: 3000 Watt
- Tank material: 2.5mm SS104
- Case material: 1.0mm SS304
- Release valve: 1"
- Power: 220V
- Temp.: 0-80℃
- Time: 1-99 mins
Ⅴ. Features
- SUS 304 stainless steel tank
- Industrial grade integrated circuit
- 0~80℃ temperature range
- 1~99 minutes working time
- Power adjustable
- Dewaxing and degreasing function
- 28KHz for gross rinse or 40KHz for intensive rinse
- Auto Stand-by, Sleep, and wake up by one key-press Mode
- Simple Digital Controller of high-precision and a long service-life
- Digital controller of high-precision and a long service-life
Ⅵ. Operating Manual
- Before operating
- Carefully unpack the cleaner, remove all packing materials and check whetherany parts have become loose or damaged during transit.
Contents: a: Main machine b: Sound proof lid c: Power cable
d: Outlet filter e: Mesh basket (Optional) f: Manual - Place the cleaner on a flat, clean surface and ensure thatthe cooling fan will get adequate ventilation, and that all controls are set to off, and the drain tap is closed.
- Ensure that thepower cables are securely and correctly connected with the single phase switch (220V) or three-phases switch(380V), and that no part of these cable is likely to contact with moisture or wate.
- Carefully fill at least 1/2 of the tank with a solvent solution. Based on cleaningrequirements, we recommend to use a small amount of cleaning solution because this will help increase the cleaning performance. Now the cleaner is ready for use.
- Operation instructions
- Fill the stainless steel tank with cleaning solution; turn the single phase switch or three phases switch on; After power-on, the LED display of the temperature displays the actual environmental temperature; while the LED display of time displays 3 minutes (default ultrasonic time).
- Time setting: Press the “TIME-/TIME+” shortly at a time means time increase/reduce 1 min at a time, press and hold means time will increase/reduce by 10 mins continuous The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press “Ultrasonic”button.
- Temperature setting: Press “temperature-/temperature+” shortly at a time means time increase/reduce 1℃ at a time, press and hold there means time will increase/decrease by 10℃. Note: Usually, the best cleaning temperature is within 40℃ to 60℃. The temperature displayed is the real temperature. The default value of the temperature is 0℃. When you set temperature, the heating function cannot be started unless the set temperature is higher than the environmental temperature and the “Heating” button is pressed after the temperature setting. When the real temperature is higher than the set temperature, the indicator of heating will turn off. However, the heating function would not be turned off automatically if the ultrasonic cleaning still works, it will start again when the water temperature is lower than the set temperature. In this case, you can only press “Heating” to turn off heating function. However, if the ultrasonic cleaning time runs out, the heating function will stop automatically.
- After time and temperature setting, press “Ultrasonic” or “Heating” button to start both functions. Press “Ultrasonic” or “Heating” button again, the Ultrasonic or heating function will stop.
- Power Controller: the power can be adjusted among 0% and 100%. Users can adjust the power value randomly based on the characters of the stuffs to be cleaned.
- Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.
HFS warrants that the Product (“Product”), when properly used and installed in conformance with HFS’ specifications for such Product, will be free from defects in materials and workmanship and will substantially conform to HFS specifications for such Product during the Warranty Period.
LIMITED WARRANTY.
- What is Covered. Except as specifically excluded below, HFS warrants, to direct Customer only, that any product manufactured by HFS and sold to Customer (a) conforms to HFS’ published and/or written specifications and (b) is free from defects in material or workmanship. This warranty expires one (1) year from the date of delivery of the product to Customer.Warranties are non-transferable, only the original purchaser will receive warranty benefits.
- Please note that chemical products are sold without any warranty, whether expressed or implied. This includes, but is not limited to, warranties of merchantability, fitness for a particular purpose, or non-infringement. Due to the inherent variability in the storage, handling, and usage of chemical substances, we cannot guarantee the product’s performance under specific conditions. It is the responsibility of the buyer to conduct their own tests and evaluations to ensure the product's suitability for their intended applications. The seller assumes no responsibility for any potential risks, damages, or losses resulting from the use of the chemical products.
What is Not Covered
Except as otherwise specifically provided in this agreement, HFS and its subsidiaries or affiliates make no further warranties, either expressed or implied, including but not limited to the implied warranties of fitness for a particular purpose, merchantability, title, and non-infringement. The limited warranty does not cover and is voided by any and all illegal uses, misuse, abuse, modifications, damages related to normal wear and tear, improper preparation, installation, or use, improper cleaning and maintenance, failure to follow care instructions, and the like.
Additionally, this limited warranty does not cover damage resulting from misuse, accident, negligence, modification or alteration of hardware or software, tampering, unsuitable environments beyond product specifications, improper maintenance, or failure caused by external products not provided by HFS. There is no warranty for uninterrupted or error-free operation or for defects in design. No warranty is provided for loss or damage to valuables, and all equipment must be tested prior to use. Furthermore, there is no warranty for products with removed or altered identification labels.
HFS does not provide any other warranties, including the implied warranties of merchantability and fitness for a particular purpose. In some jurisdictions, limitations on implied warranties may not apply. Consumable maintenance items, such as gaskets, seals, cutter blades, pump oil, and cutting sticks, are not covered under this warranty as they are designed to be replaced periodically. HFS is not responsible for returning products not covered by this limited warranty.
UNLAWFUL USES
Customer agrees to not use any products sold by HFS for any unlawful or illegal purposes or for use which product was not intended for including any alteration of the product. Customer agrees to indemnify, defend, and hold harmless HFS, its subsidiaries and affiliates, and their respective officers, directors, employees, agents, representatives and shareholders, predecessors and successors, from and against any and all claims, demands, causes of action, damages, losses, liabilities, judgments, taxes, costs, fees and expenses (including, without limitation, reasonable costs and expenses of investigation and settlement and reasonable attorneys’ fees and expenses), to the extent arising out of or relating to any unlawful or illegal use of products sold by HFS. Such indemnification obligations shall survive the expiration or termination of this Agreement for any reason.
LIMITATION OF LIABILITIES. TO THE MAXIMUM EXTENT PERMITTED BY LAW, UNDER NO CIRCUMSTANCES WILL HFS OR ITS DIRECTORS, OFFICERS, EMPLOYEES, AGENTS, SUBSIDIARIES OR AFFILIATES BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, MULTIPLIED, OR INCIDENTAL DAMAGES OR LOST PROFITS, WHETHER FORESEEABLE OR UNFORESEEABLE, OR PREJUDGMENT INTEREST OR ATTORNEYS’ FEES OR COSTS BASED ON CLAIMS OF CUSTOMER OR ANY OTHER PARTY ARISING OUT OF BREACH OR FAILURE OF EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, MISREPRESENTATION, NEGLIGENCE, STRICT LIABILITY IN TORT, FAILURE OF ANY REMEDY TO ACHIEVE ITS ESSENTIAL PURPOSE, OR OTHERWISE.
PRIVACY AND NON-DISCLOSURE. While still complying with all applicable laws, HFS will endeavor to preserve Customer’s identity from disclosure to third parties.
FORCE MAJEURE. HFS shall not be responsible or liable for any failure to perform hereunder if such failure is caused by acts of God, acts of government, strikes or labor disputes, failures of transportation, fire, flood, disease, epidemic or other casualty, failures of subcontractors or suppliers, or any other cause or causes that are beyond HFS’ reasonable control.
GOVERNING LAW AND VENUE. This Agreement shall be governed by the procedural and substantive laws of the State of California. Any litigation arising under or pursuant to this agreement shall be conducted in Los Angeles County.
DISPUTE RESOLUTION. Any dispute arising between Customer and HFS arising out of or in connection with this Agreement or the interpretation, breach, or enforcement thereof, including the determination of the scope or applicability of this agreement to arbitrate (collectively referred to as a “Dispute”) shall be resolved as follows: (1) the parties shall first attempt to resolve any Dispute through informal, good-faith negotiations and/or mediation; (2) If the Dispute is not informally resolved within thirty (30) calendar days of written notice of the Dispute by either party to the other, then the DISPUTE SHALL BE FINALLY SETTLED BY BINDING ARBITRATION administered pursuant to JAMS’ Comprehensive Arbitration Rules and Procedures and in accordance with the Expedited Procedures in those Rules (or, if mutually agreed to by the parties, pursuant to JAMS’ Streamlined Arbitration Rules and Procedures). The arbitrator shall not have any power to alter, amend, modify or change any of the terms of this Agreement nor to grant any remedy which is either prohibited by the terms of this Agreement, or not available in a court of law. The arbitrator is not empowered to award punitive or exemplary damages, except where permitted by statute, and the parties waive any right to recover any such damages. In the event this arbitration agreement or a resulting arbitration award is subject to review by a court, such court shall use the arbitrary and capricious standard of review. The costs of any arbitration, including any JAMS administration fee, the arbitrator’s fee, and costs for the use of facilities during the hearings, shall be borne equally by the parties to the arbitration; provided, however, that all costs and expenses of the arbitration, including the arbitrator's fees and costs, expert fees and costs, and reasonable attorneys’ fees and costs incurred, shall be awarded to the prevailing or most prevailing Party as determined by the arbitrator. Judgment on a final award rendered by the arbitrators may be entered and enforced in a Court venue in Los Angeles County.
ASSIGNMENT
No right or interest in this Agreement may be assigned by Customer without the written permission of HFS, and any other attempted assignment shall be wholly void and totally ineffective for all purposes. This provision prohibits assignment of rights only; the right to delegate duties is in no way impaired by reason of this provision.
EFFECT OF PARTIAL INVALIDITY. If a court or an arbitrator of competent jurisdiction holds any provision of this Agreement to be illegal, unenforceable, or invalid for any reason, the validity and enforceability of the remaining provisions shall not be affected.
ENTIRE AGREEMENT; MODIFICATION BY SUBSEQUENT WRITING: This agreement contains the entire agreement between the parties. No other agreement, statement, or promise, written or oral, made on or before the effective date of this agreement will be binding on the parties. This written agreement supersedes all prior agreements. This agreement may be modified by subsequent agreement of the parties only by an instrument in writing.